Everybody will have their own unique thoughts with regards to What Would Cause My Electric Water Heater to Stop Working?.
Lots of contemporary houses utilize an electric water heater for their heating system, as a result of its ease and also convenience of use. Nevertheless, similar to any other electric home appliances, issues may arise with its use, suddenly. It can be truly aggravating to wake up to a cool shower as opposed to a hot one or having your bath with water that isn't warm sufficient and even too warm. Whatever the instance might be, water heater problems can be fairly stressful. Thankfully, we've made a checklist of feasible remedies to your hot water heater issues. There are a variety of aspects that might create much of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the major power supply for security. Whatever the problem is, getting it dealt with ought to not pose too much of a concern if you follow these actions:
Inspect Your Power Supply:
As standard as this may appear, it is extremely essential. Without appropriate power, your hot water heater will not work. So the first thing to do when your water suddenly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, simply turn it on and off again. Change any damaged or damaged fuse. Evaluate the appliance with power after these modifications to see if it's currently working.
Inspect the Burner in the Water Heater:
If it's not a power trouble, then try looking into your burner if it is still functioning. Evaluate each of your burner to ensure the problem isn't with any of them. If any one of them is faulty, replace that component and then inspect whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature level setups on your upper thermostat. Ensure the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red switch for temperature reset over the thermostat. This must aid heat up the water. Turn the circuit breaker back on as well as examine if the problem has been settled.
Call A Professional:
If after replacing all malfunctioning components as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to contact an expert plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, an expert plumber would assist resolve the issue.
Final thought
Water heater problems are not always significant. Most of them result from small problems like a blown fuse or worn-out burner. Changing the defective parts need to suffice. Nonetheless, if you are still not able to fix the issue, give a call to your closest plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our part about What Would Cause My Electric Water Heater to Stop Working?. Thanks so much for taking a few minutes to read through our article post. Those who appreciated our article please be sure to share it. Thanks so much for taking the time to read it.
Expertly handling plumbing emergencies daily.